Ukucaciswa kanye nemfuneko
E-United States,Ukulawulwa Kwezokuphepha Nezempilo EmsebenziniImithetho ye-(OSHA) mayelana ne-eyewash ephuthumayo kanye nesiteshi sokugeza iqukethwe ku-29I-CFR1910.151 (c), ehlinzeka ngokuthi “Lapho amehlo noma umzimba wanoma yimuphi umuntu ungachayeka engoziniokudlayoizinto ezisetshenziswayo, izinsiza ezifanele zokumanzisa ngokushesha noma ukushaywa kwamehlo nomzimba zizohlinzekwa endaweni yokusebenza ukuze zisetshenziswe ngokushesha.”Kodwa-ke, umthetho we-OSHA awucaci kahle ukuthi yisiphi isikhungo esidingekayo.Ngenxa yalesi sizathu,I-American National Standards Institute(I-ANSI) ithuthukise indinganiso (ANSI/ISEA Z358.1-2014) yeziteshi eziphuthumayo zokugeza amehlo kanye neshawa, okuhlanganisa ukuklanywa kweziteshi ezinjalo.
Ishawa yokuphepha
- Umzila osuka kungozi uya eshaweni yokuphepha ngeke ube nezithiyo nobungozi bokukhubeka.
- Ukunikezwa kwamanzi kufanele kube ngokwanele ukunikeza okungenani amalitha angu-20 ngomzuzu wamanzi imizuzu engu-15 (Isigaba 4.1.2, 4.5.5).
- Ivalvu engasebenzi ngesandla kufanele ikwazi ukuvuleka phakathi nomzuzwana owodwa futhi ihlale ivuliwe ize ivalwe mathupha (Isigaba 4.2, 4.1.5).
- Ingaphezulu lekholomu lamanzi akufanele libe ngaphansi kuka-82″ (208.3 cm) futhi lingabi ngaphezu kuka-96″ (243.8 cm) ngaphezu kwesitezi esingaphezulu umsebenzisi ami kuso(Isigaba 5.1.3, 4.5.4).
- Indawo emaphakathi yekholomu yamanzi kufanele okungenani ibe ngu-16″ (40.6 cm) kude nanoma yikuphi ukuphazamiseka (Isigaba 4.1.4, 4.5.4).
- I-Actuator kufanele ifinyeleleke kalula futhi itholakale kalula.Akufanele ibe ngaphezu kuka-69″ (173.3 cm) ngaphezu kwesitezi umsebenzisi ami kuso (Isigaba 4.2).
- Ku-60" (152.4 cm) ngaphezu kwephansi, iphethini yamanzi kufanele ibe ngu-20" (50.8 cm) ububanzi (Isigaba 4.1.4).
- Uma ishawa ebiyelwe ihlinzekwa.Kufanele inikeze u-34″ ububanzi besikhala esingavimbekile (86.4 cm) (Isigaba 4.3).
- Izinga lokushisa lamanzi eshaweni yokuphepha kufanele libe phakathi kuka-60 °F - 100 °F (16 °C - 38 °C).
- Iziteshi zeshawa eziphephile kufanele zibe nezimpawu ezibonakala kakhulu nezikhanyiswe kahle.
Isiteshi sokugeza amehlo
- Indlela esuka ebungozini eya Ekugezeni Kwamehlo noma Ukugeza Amehlo/Ubuso ngeke ibe nezithiyo nobungozi bokukhubeka.
- Isiteshi sokugeza amehlo sizosula womabili amehlo ngesikhathi esisodwa ngaphakathi kwemihlahlandlela yegeji (igeji ye-Eyewash enemininingwane ku-ANSI/ISEA Z358.1-2014) (Isigaba 5.1.8).
- Ukugeza Amehlo noma Amehlo/Ubuso kuzohlinzeka ngokugeleza kwamanzi okulawulwayo okungalimazi umsebenzisi (Isigaba 5.1.1).
- Imilomo noketshezi olushaywayo kuzovikelwa ekungcoleni okuphuma emoyeni (izimbozo zothuli), futhi ngeke zidinge ukunyakaza okuhlukile komsebenzisi lapho evula okokusebenza (isigaba 5.1.3).
- Ukugeza amehlo kufanele kulethe i-0.4 gpm imizuzu engu-15, Ukugeza Amehlo/Ubuso kufanele kunikeze i-3 gpm imizuzu engu-15.
- Ingaphezulu lokugeleza kwamanzi okugeza Iso noma Iso/Ubuso akumele liwele ngaphansi kuka-33″ (83.8 cm) futhi akumele libe ngaphezu kuka-53″ (134.6 cm) ukusuka phansi lapho umsebenzisi ami khona (Isigaba 5.4.4) .
- Ikhanda noma amakhanda Okugeza Amehlo noma Ukugeza Amehlo/Ubuso kumelwe abe kude ngokungu-6″ (15.3 cm) kunoma yiziphi izithiyo (Isigaba 5.4.4).
- I-valve kufanele ivumele ukusebenza kwe-1 yesibili futhi i-valve izohlala ivulekile ngaphandle kokusetshenziswa kwezandla zomqhubi kuze kube yilapho ivalwa ngamabomu.(Isigaba 5.1.4, 5.2).
- Ngezandla noma ngokuzenzakalelayoama-actuatorkuzoba lula ukutholakala futhi kufinyeleleke kalula kumsebenzisi (Isigaba 5.2).
- Izinga lokushisa lamanzi lesiteshi sokugeza Iso noma Iso/Ubuso kufanele libe phakathi kuka-60–100 °F (16–38 °C).
- Iziteshi zokugeza amehlo noma zamehlo/zobuso kufanele zibe nezimpawu ezibonakalayo nezikhanyiswe kahle.
Indawo
Amashawa okuphepha neziteshi zokugeza amehlo kufanele zibe phakathi kwamasekhondi angu-10 nebanga lokuhamba noma amafidi angu-55 (i-appendix B) ukusuka engozini futhi kufanele zibe sezingeni elifanayo nengozi, ukuze umuntu angadingeki ehle noma ehle ezitebhisini uma kwenzeka ingozi. kwenzeka.Ngaphezu kwalokho, indlela yendlela kufanele icace futhi ingabi nezithiyo.
U-Aria Sun
I-Marst Safety Equipment (Tianjin) Co., Ltd
ENGEZA: No. 36, Fagang South Road, Shuanggang Town, Jinnan District, Tianjin, China(In the Tianjin Cao's Bend Pipe Co.,Ltd Yard)
TEL：+86 189 207 35386 Email: aria@chinamarst.com
Isikhathi sokuthumela: Jun-20-2023
