Emergency Eyewash Station with Shower BD-560
PRODUCT INFORMATION:
1、EYE&FACE WASHING STATION: the spray heads have a built-in dual-layer filter to filter impurities in the water, make sure 15min safety eye washing time during emergency. provide a comfortable stream, hand free operation, to protect hurt eye
2、EMERGENCY SHOWER: when shower is needed, pull down the shower rod, then emergency shower can be gotten. This emergency shower station was suitable for place where water pipe is available
3、NPT Adapter: All the eyewash stations with shower come with two NPT thread adapter, to connect the water RC thread inlet/outlet with NPT water pipe. Please check the package before installation, any problem, please contact us.
4、PARAMETERS:
① Compliance: American ANSI Z358.1-2014 (OSHA approved);
② Nominal pressure: 1.0Mpa;
③ Water pressure: 0.2~0.4Mpa;
④ Eyewash flow: ≥11.4L/min;
⑤ Shower flow: ≥75.7L/min;
⑥ Inlet size: NPT 1-1/4, Drain size: NPT 1-1/4 thread
5、STAINLESS STEEL MATERIAL: made of SS304 stainless steel, with a smooth surface, excellent acid, alkali corrosion resistance. Eye wash station can be installed outdoors or indoors, can be effectively used 0.3 million times
Product details:
Name | Combination Eye Wash & Shower |
Brand | WELKEN |
Model | BD-560 |
Shower Valve | 1" 304 stainless steel ball valve |
Eye Wash Valve | 1/2”304 stainless steel ball valve |
Supply | 11/4" FNPT |
Waste | 1 1/4" FNPT |
Eye Wash Flow | ≥11.4 L/Min |
Shower Flow | ≥75.7 L/Min |
Hydraulic Pressure | 0.2MPA-0.6MPA |
Original Water | Drinking water or fitered water |
Using Environment | Places where has hazardous substance splashing, such as chemicals, haz-ardous liquids, solid, gas and so on. |
Special Note | If the acid concentration is too high, recommend to use 316 stainless steel. |
When using ambient temperature below 0°C, use antifreeze eye wash. | |
The eye wash & shower is made of high quality 304 stainless steel. | |
Can install anti-scalding device to avoid the media temperature is too high in the pipe after the sun exposure and cause user scalding. The standard an-ti-scalding temperature is 35"C. |
Technical parameters:
Minimum Performance Requirements – Min Working Pressure | 210 kPa Caution should be taken when pressure exceeds 550 kPa (80 psi)kPa |
Minimum Performance Requirements – Min Flow Requirements | Shower: 76 lpm (20 US gpm), Eye/ face wash: 26 lpm (6.9 US gpm) |
Mounting Base Plate | Size: 150 x 150 mm (5 9/10” x 5 9/10”) with 4 Bolt Holes 11 mm (7/16”) |
Shipping | Weight: approx. 13.1 kg, Dimensions: 790*335*320 mm |
Related products:
BD-560H | 304 stainless steel 、 ABS head and bowl |
BD-560K | 304 stainless steel 、ABS bowl cover |
BD-560N | 304 stainless steel、ABS head and bowl、and single nozzle |
BD-560G | 304 stainless steel、ABS single nozzle |