Industry News

OSHA’s requirements for emergency eyewashes and showers can be found in 29 CFR 1910.151(c): “Where the eyes or body of any person may be exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body shall be provided within the work...Read more »

Concept of certificate of origin It provides a strict definition to “certificate of origin”. The scope of this concept covers only the specific form issued by an authorized third party: Certificate of origin means a specific form identifying the goods, in which the authority or body e...Read more »

When applying a lockout device a Lockout Padlock is used to secure the Lockout Tagout device in place. This inhibits the energy source that is being ‘locked off’ from being used. In order for the energy source to be accessed both the padlock and the lockout kit must be removed.  ...Read more »

Name Combination Eye Wash & Shower Brand WELKEN Model BD-550A/B/C/D BD-560/G/H/K/N Head 10” stainless steel or ABS Eye Wash Nozzle ABS spraying with 10” waste water recycle bowl Shower Valve 1” 304 stainless steel ball valve Eye Wash Valve 1/2” 304 stainless steel ball v...Read more »

In fact, as an industrial lockout, only have a padlock couldn’t to open a circuit breaker or valve. They need to circuit breaker lockout or valve lockout to collocated with padlock to use. The circuit breaker lockout and valve lockout are fixed device in one position, and using padlock to lock. I...Read more »

Requirements for Locks: All padlocks utilized must be manufactured for the sole purpose of lockout. Under no circumstances may a traditional security padlock be used for LOTO purposes. Alternately, no padlocks intended for LOTO are permitted for use in general security applications (i.e., locking...Read more »

Name Stand Eye Wash Brand WELKEN Model BD-540E BD-540F BD-540A BD-540C BD-540N Valve Eye wash valve is made of 1/2” 304 stainless steel ball valve Supply 1/2″ FNPT Waste 1 1/4″ FNPT Eye Wash Flow ≥11.4L/Min Hydraulic Pressure 0.2MPA-0.6MPA Original Water Drin...Read more »

Incoterms, widely-used terms of sale, are a set of 11 internationally recognized rules which define the responsibilities of sellers and buyers. Incoterms specify who is responsible for paying for and managing the shipment, insurance, documentation, customs clearance, and other logistical activiti...Read more »

Lock out, tag out (LOTO) is a safety procedure used to ensure that dangerous equipment is properly shut off and not able to be started up again prior to the completion of maintenance or repair work. It requires that hazardous energy source be “isolated and rendered inoperative” before...Read more »

Emergency eyewash and shower units are designed to rinse contaminants from the user’s eyes, face or body. As such, these units are forms of first aid equipment to be used in the event of an accident. However, they are not a substitute for primary protective devices (including eye and face protect...Read more »

Emergency eyewash facilities and safety showers must be in unobstructed and accessible locations that require no more than 10 seconds for the injured person to reach along an unobstructed pathway. If both eyewash and shower are needed, they must be located so that each can be used at the same tim...Read more »

Lockout Tagout program ensures employee safety from unexpected start-up or energizing of equipment during service and maintenance operations. Lockout//Tagout is important because of the following reasons - - Prevents serious injuries to workers performing maintenance or repair on machines or equ...Read more »

1. Install the self-locking anti-fall brake (speed differential) 2. Wear a full body safety belt 3. Link the safety belt hook to the safety hook of the cable winch and anti-fall brake 4. One person slowly shakes the winch handle to safely transport the person to the confined space, and when the p...Read more »

Safety shower flow rates must meet the need for sufficient flow of water to flush the affected area completely. Showers require a minimum supply of 20 gallons per minute for at least 15 minutes. Eye washes (including self-contained models) require a minimum flow rate of 0.4 gallons per minute. &n...Read more »

  Lock out, tag out (LOTO) is a safety procedure used to ensure that dangerous equipment is properly shut off and not able to be started up again prior to the completion of maintenance or repair work. It requires that hazardous energy sources be “isolated and rendered inoperative”...Read more »

15 minutes Remember that any chemical splash should be rinsed for a minimum of 15 minutes but rinsing time can be up to 60 minutes. The temperature of the water should be one that can be tolerated for the required length of time. Marst Safety Equipment (Tianjin) Co.,Ltd is manufactur...Read more »

Specification and requirement In the United States, Occupational Safety and Health Administration (OSHA) regulations on emergency eyewash and shower station are contained in 29 C.F.R. 1910.151 (c), which provides that “Where the eyes or body of any person may be exposed to injurious corros...Read more »

Keeping your machines running keeps your business moving. But required maintenance means lockout tagout procedures must be followed to keep your employees safe. Whether you’re starting your lockout tagout program from scratch or taking your program to best in class, Brady can help every step of t...Read more »

An emergency eyewash and safety shower station are essential equipment for every laboratory that uses chemicals and hazardous substances. Emergency eyewash and safety shower stations serve the purpose of reducing workplace injury and keeping workers away from various dangers. Types There are sev...Read more »

Emergency showers must flow at a minimum rate of 20 US gallons (76 liters) of potable water per minute, for 15 minutes. This ensures enough time to remove contaminated clothing and rinse any chemical residue. Likewise, emergency eyewashes must deliver at least 3 US gallons (11.4 liters) per minut...Read more »

The OSHA standard 29 CFR 1910.151(c) requires eyewash and shower equipment for emergency use where the eyes or body of any employee may be exposed to injurious corrosive materials. For details on emergency eyewash and shower equipment we reference consensus standard ANSI Z358. Marst Safety Equipm...Read more »

Simply installing emergency equipment is not sufficient means of ensuring worker safety. It is also very important that employees are trained in the location and proper use of emergency equipment. Research shows that after an incident has occurred, rinsing eyes within the first ten seconds is ess...Read more »

ANSI Requirements: Location of Emergency Shower and Eyewash Stations The first few seconds after a person is exposed to hazardous chemicals are critical. The longer the substance remains on the skin, the more damage occurs. To meet the ANSI Z358 requirements, the emergency shower and eyewash stat...Read more »

      Name Portable Eye Wash Brand WELKEN Model BD-600A BD-600B External Dimensions Water tank W 540mmm X D 300mm X H 650mm Water Storage 60L Flushing Time ＞15 minutes Original Water Drinking water or saline, and pay attention to quality guarantee period Us...Read more »