Introduction of Wall-mounted Eye Wash BD-508A

The Introduction of Wall-mounted Eye Wash BD-508A

Although the wall-mounted eye wash series only has the function of eye wash and no body shower function, it occupies a small space and can be directly installed on the wall of the use place, and the fixed water source can be connected. It is often used in many laboratories, research centers, epidemic prevention stations, etc., where the installation space is limited. When harmful substances are sprayed on the eyes, face, neck and other parts of the user, the switch of the wall-mounted eye wash device can be opened immediately for flushing, the rinsing time is not less than 15 minutes, and then the medical treatment is required immediately.

Technical Data:

Valve: Eye wash valve is made of 1/2” 304 stainless steel ball valve

Supply: 1/2″ FNPT

Waste: 1 1/4″ MNPT

Eye Wash Flow≥11.4L/Min

Hydraulic Pressure: 0.2MPA-0.6MPA

Original Water: Drinking water or filtered water

Using Environment: Places where has hazardous substance splashing, such as chemicals, hazardous liquids, solid, gas and other contaminated environment where may be burning.

Special Note: If the acid concentration is too high, recommend to use 316 stainless steel.

When using ambient temperature below 0℃, use antifreeze eye wash.

Standard: ANSI Z358.1-2014