A rescue tripod is a tool that is usually needed in emergency rescue. It mainly uses a retractable tripod. Generally, there are specific special devices. Which ones include ascending and descending devices. The safety of the rescue tripod is guaranteed.
There are many kinds of rescue tripods, mainly including rescue tripods, some rescue tripods, and some rescue tripods for deep wells, firefighters’ rescues, and rescue implementation agencies.
Scope of application: deep wells, high-rise buildings, cliffs, other high-rise residential buildings and other difficult operation areas.
It is suitable for firefighting, road engineering, construction and installation, petrochemical, electric rescue agencies.
Features
1. The retractable feet are made of high-strength lightweight alloy, and the feet are equipped with ring-shaped protection chains;
2. The winch adopts a positive and negative self-locking structure to ensure the safety of the sling;
3. The sling is made of a special stainless steel wire rope with a diameter of 4mm, which has good flexibility and will not be damaged due to corrosion or lack of oil;
4. Convenient assembly, can be installed in wellheads and pitheads according to local conditions, and is not restricted by the unevenness of the ground.
Before installation, carefully check the purchased instrument to ensure that the instrument is in good condition and there is no rust.
The use method and maintenance requirements of the fire rescue tripod
1. The rescue tripod is a lifting device, which must be checked by a dedicated person every month. Before each use, check whether the sling can be normally wound on the hinge wheel.
2. Regularly check whether the connection joint of the sling is firm enough.
3. The sling on the winch needs to be left three to four laps when it is open to ensure that the sling does not slip off.
4. The rescue tripod should be stored in a dry place, and should not be stored with corrosive liquids such as acids and alkalis.
Putting away the fire rescue tripod
1. Press the interlock lever and shrink the bracket.
2. Lay the tripod flat on a flat surface, remove the positioning push pins, and then retract the bracket.
Post time: Sep-16-2021
