The eye washer is usually used to rinse or shower when the eyes, face, body and other parts of employees are accidentally splashed or attached by toxic and harmful substances, thereby reducing further injuries. The wounded can then go to the hospital for treatment. No company always has an accident when it is okay, so the daily use frequency of eyewash is not very high. However, like a fire extinguisher, it is rarely used when placed there, but when a danger occurs, it must be used immediately. This requires us to pay attention to the maintenance and maintenance of the eyewash. Otherwise, there will be problems when it is used, which will affect the rescue if it is not used normally, and even very serious consequences may occur.
The maintenance of the water quality of the eyewash is very important. Some companies do not carry out regular water quality maintenance after they are equipped with the eyewash. As a result, when the eyewash is turned on, the water quality inside is deteriorated and the color is yellow. If it is rinsed, it will cause secondary injury. How to prevent this from happening?
The maintenance method of water supply pipeline and eyewash storage: regular water discharge, send a person to turn on the eyewash switch and spray switch of the eyewash every week, and the drainage should last at least 1 minute. Can work normally. Whether it is the water source for normal use of the eye washer or the water source when the eye washer is tested, as long as the water source from the eye washer is the source of waste water, but it is not necessarily the source of pollution.
Eyewash is a security device that can save lives at critical moments. Therefore, since the eyewash is installed by the enterprise, it must be really used. Therefore, regular maintenance is essential and must be paid attention to.
Post time: May-20-2020
