Introduction of Sanitary Grade Stainless Steel Combination Eye Wash Shower BD-530
Combination eye washers are often used when workers are accidentally splashed with chemicals and other harmful substances on the eyes, body, etc., and need to be flushed or rinsed as soon as possible to dilute harmful substances to minimize the hazard.
However, there are some special industries, such as the food industry, which have very strict requirements on the cleanliness of the environment. Eyewashers naturally use pure grade materials. Therefore, these special industries also need to use eyewash with specific materials.
Marst pure grade stainless steel combination eye washes BD-530, whose the main body is made of high quality sanitary grade 304 stainless steel, and the inner wall of the main pipe is also polished. It will not stick to the impurities in the water, especially suitable for the laboratory, medical and food industries.
Technical Data:
Shower Valve: 1” 304 stainless steel ball valve
Eye Wash Valve: 1/2” 304 stainless steel ball valve
Head: 10” stainless steel
Eye Wash Nozzle: Green ABS spraying with 10” waste water recycle bowl
Supply: 1″ FNPT
Waste: 1″ FNPT
Eye Wash Flow ≥11.4 L/Min, shower flow≥75.7 L/Min
Hydraulic Pressure: 0.2MPA-0.6MPA
Original Water: Drinking water or filtered water
Using Environment: Places where has hazardous substance splashing, such as chemicals, hazardous liquids, solid, gas and so on.
Special Note: If the acid concentration is too high, recommend to use 316 stainless steel.
When using ambient temperature below 0℃, use antifreeze eye wash.
The eye wash & shower is made of high quality 304 stainless steel, the inner wall is polished and it will not keep the water impurities, especially for the laboratory, medical and food industries.
Can install anti-scalding device to avoid the media temperature is too high in the pipe after
the sun exposure and cause user scalding.The standard anti-scalding temperature is 35℃.
Standard: ANSI Z358.1-2014
Post time: Nov-26-2019
