The eye washer is often used by workers to accidentally splash the eyes, face, body, clothes, etc. with chemicals and other toxic and harmful substances. Immediately use the eye washer to rinse for 15 minutes, which can effectively dilute the concentration of harmful substances. Achieve the effect of preventing further damage. However, the eyewash can not replace medical treatment. After using the eyewash, you can go to the hospital for professional treatment.
Eyewash installation specifications:
1. In the production and use areas of highly toxic, highly corrosive, and chemicals with a temperature higher than 70 ℃, and acidic and alkaline materials, including near the sampling points for loading, unloading, storage, and analysis, it is necessary to set up safe spray eyewashes and their locations It should be set 3m-6m away from the accident (dangerous place), but not less than 3m, and should be arranged away from the direction of chemical injection, so as not to affect its use when an accident occurs.
2. In the production and use area of general toxic and corrosive chemicals, including near the sampling point for loading, unloading, storage and analysis, the safety spray eyewash station shall be set at a distance of 20-30m. Gas alarm
3. In the chemical analysis laboratory, there are frequently used toxic and corrosive reagents, and positions that may cause damage to the human body should be set up with safety spray eyewash.
4. The distance between the location of the safety spray eyewash and the point where the accident may occur is related to the toxicity, corrosiveness and temperature of the chemicals used or produced, and the setting point and requirements are usually proposed by the process.
5. The safety spray eyewash should be installed on the unobstructed passage. Multi-storey workshops are generally arranged near the same axis or near the exit.
6. A safety spray eyewash should be installed near the battery charging room.
Post time: Apr-22-2020