In the event of an accident, if the eyes, face or body are splashed or contaminated with toxic and hazardous substances, do not panic at this time, you should go to the safety eyewash for emergency flushing or showering at the first time, so as to dilute the harmful substances Concentration to prevent further damage.
Steps for proper use of eyewash:
1. Quickly go to the eyewash station for rinsing, and do n’t waste time, so the daily eyewash should be set at a flat location that can be reached in 10 seconds, so that the injured can be reached in time and easily.
2. Push the push plate to allow the eyewash to work normally
3. Start rinsing
4. Hold your eyes open with your fingers and rinse your eyes with an eyewash for 15 minutes. If it is less than 15 minutes, it will be easily washed out.
5. When rinsing the eyes, it is necessary to roll the eyeballs. After the eyes are opened, the eyeballs gently rotate from left to right and from top to bottom to ensure that every part of the eyeballs is flushed with water.
6. The invisible eyes need to be removed. In the process of flushing, remove the invisible eyes. Don’t flush the water before, and remove the invisible eyes first, which is prone to delay time. In this emergency, every second is very important.
7. After rinsing, you must go to the hospital for treatment in time. The eyewash can not replace medical treatment, but only increases the chance for the doctor to cure successfully.
Eyewash manufacturers remind the majority of companies that sometimes the more urgent they are, the easier it is to know what to do. This requires ordinary companies to provide guidance to employees on the use of eyewashes to ensure that they are used correctly when needed.
Post time: Apr-15-2020
