Only the eyes are washed and there is no spray part. The eyewash that is directly installed on the ground and connected to drinking tap water is a vertical eyewash.The method of use is to open the eyewash part of the vertical eyewash device to rinse when the chemical substance is sprayed on the eyes and face. The rinse time is more than 15 minutes.
Standard for use of vertical eyewash
- American Eyewash Standard ANSI/ISEA Z358.1 2009 Emergency Eyewash and Shower Standard
- European Eyewash Standard EN15154: 1/2/3/4/5 Emergency Eyewash and Shower Standard
- Australian Eyewash Standard AS4775-2007 Emergency Eyewash and Shower Standard
The basic technical parameters of the vertical eyewash
1. Install directly on the ground at the work site
2. Connect to drinking tap water
3. Use water source pressure: 0.2~0.6Mpa
4. Eyewash water flow: >1.5L/MIN
5. Eye/face wash water flow:> 11.4L/MIN
6. Use water source temperature: 16~38℃
7. Use time:> 15 minutes
Post time: Sep-21-2020
