The emergency eyewash shower equipment is designed to flush the user's eyes, face, or body from pollutants. For this reason, they are also the first aid equipment in the event of an accident and an indispensable product for safety protection equipment.
When the ordinary emergency shower eyewash device is installed in a working area with a low temperature, the water remaining in the device will form a solid due to low-temperature freezing. When the device is activated, the water in the pipeline becomes solid and unable to flow, blocking the normal water supply and preventing the device from working normally. When workers in dangerous areas have accidents and need emergency treatment, if the device fails to work properly and in time, the treatment results will be severely affected. Therefore, it is recommended to install an electric heat tracing emergency shower eyewash in a dangerous work area with a low temperature. To ensure that the water in the device does not freeze.
The BD-590 electric eyewash with heat tracing developed by Marst Safety Equipment (Tianjin) Co., Ltd. is an antifreeze eyewash designed for cold areas. The eyewash can be used normally within the range of -35℃-45℃, and the shell is acid-resistant. The alkali is made of PVC, the inner tube is made of 304 stainless steel, and is wound by a self-limiting temperature electric heating cable. The insulation layer is composed of thermal insulation rock wool, and the overall color is white and green.
Basic features
The working water pressure is 0.2~0.6mpa. If it exceeds, please install a pressure-reducing valve to prevent excessive water pressure from causing damage to the eyes.
Flow rate: According to different pipeline pressures, the flow rate changes accordingly. Within the specified water pressure range, the flushing flow rate is greater than or equal to 75.7L/min, and the flushing flow rate is greater than or equal to 11.4L/min.
Valve: The punching valve is a 1 "corrosion-resistant 304 stainless steel ball valve. The punching valve is a 1/2 "corrosion-resistant 304 stainless steel ball valve.
Water inlet: 1 1/4" inch male thread.
Drain: 1 1/4" inch male thread.
Voltage: 220V~250V.
Power: ≤200W
Tips for use:
This eyewash device is suitable for use in places with explosion-proof requirements.
The standard product explosion-proof mark: Exe ll T6 and the corresponding explosion-proof mark can be customized according to the use environment.
The electric heating eyewash can only be used to heat and antifreeze the eyewash.
There is no way to increase the water temperature of the eyewash.
If it is necessary to increase the temperature of the water from the eyewash, an electric heating eyewash must be selected.
Post time: Nov-16-2021
