Foot Pedal Stand Eye Wash BD-540N
Stand Eye Wash BD-540N is used to temporarily slow down the further harm of harmful substances to the body, face and eyes of the staff when toxic and harmful substances (such as chemical liquid, etc.) are splashed on the staff's body, face and eyes or the fire causes the staff's clothes to catch fire. Further treatment and treatment need to follow the doctor's guidance to avoid or reduce unnecessary accidents.
Details:
Valve: Eye wash valve is made of 1/2” 304 stainless steel ball valve
Supply: 1/2" FNPT
Waste: 1 1/4" FNPT
Eye Wash Flow≥11.4L/Min
Hydraulic Pressure: 0.2MPA-0.6MPA
Original Water: Drinking water or filtered water
Using Environment: Places where has hazardous substance splashing, such as chemicals, hazardous liquids, solid, gas and other contaminated environment where may be burning.
Special Note: If the acid concentration is too high, recommend to use 316 stainless steel.
When using ambient temperature below 0℃, use antifreeze eye wash.
Can install anti-scalding device to avoid the media temperature is too high in the pipe after
the sun exposure and cause user scalding.The standard anti-scalding temperature is 35℃.
Standard: ANSI Z358.1-2014
Stand Eye Wash BD-540N:
1. User-friendly design.
2. Quality Assurance.
3. Corrosion-resistant.
4. Easy to use.
5. Durable valve core.
6. Mild flushing without harming eyes.
Stand eye wash is one of eye washing devices. When the operator’s eyes or faces are accidentally splashed by toxic and harmful substances, they can quickly wash eyes and faces at the vertical eye washer within 10 seconds. The washing lasts for 15 minutes, effectively diluting the concentration of harmful substances, thus reducing the further harm. However, it is important to note that the stand eye washing device only increases the probability of success of medical treatment, and can not replace the professional treatment of the hospital. Later, it needs to be treated in the hospital.
This type of eyewash only has eyewash system and no body shower system. Its structure is as follows:
1. Eyewash nozzle 2. Eyewash Basin 3. Hand push board 4. Subject 5. Drainage tee 6. Bottom bracket
| Product | Model No. | description |
| Stand Eye Wash | BD-540A | 304 stainless steel. ABS bowl |
| BD-540B | The whole body is made of high quality ABS, better corrosion resistance, economical. Warning yellow, eye-catching. | |
| BD-540C | 304 stainless steel | |
| BD-540D | Eye wash valve is made of 1/2” 304 stainless steel ball valve | |
| BD-540E | 304 stainless steel. ABS single nozzle | |
| BD-540F | 304 stainless steel. ABS bowl and single nozzle | |
| BD-540N | 304 stainless steel. ABS foot pedal |
